Skip to content 
Get it fitted properly with Extreme Cool
Home Appliance Installation Dubai
Positioned, connected and tested before we leave
Extreme Cool installs home appliances across Dubai, including washing machines, dishwashers, refrigerators and freezers, ovens, cookers, hobs, dryers and built-in kitchen appliances. Tell us what you need installed, share a few details, and request a quote or book a visit.
Professional Home Appliance Installation Services in Dubai
A new appliance is only as good as its installation.
Poor levelling can cause vibration and noise. A loose water connection can leak behind a cabinet for weeks. Blocked ventilation can stop a refrigerator or oven working as it should. Most of these problems are avoidable when the appliance is positioned, connected and tested correctly.
Requirements differ between appliance types, so we follow the manufacturer’s installation instructions for each one. We don’t promise that installation will extend an appliance’s lifespan or improve performance, but a correct fit removes avoidable causes of faults.
Our Appliance Installation Services
What each installation typically involves. The exact scope is confirmed in your quote.
Washing machine installation
Positioning and levelling, water inlet connection, drainage setup, removal of transport bolts where applicable, and a test cycle to check for leaks and vibration.
Dishwasher installation
Water supply, drainage and electrical requirements are checked first. We then level the unit, fit it under the counter where applicable, and run a test to check for leaks.
Refrigerator and freezer installation
Positioning with proper ventilation clearance, levelling, power connection, and a water-line connection for compatible models with ice or water dispensers.
Oven and cooker installation
Freestanding and built-in models, positioned and fitted securely with the right connections. Gas connections must be handled by appropriately qualified professionals.
Hob installation
We check worktop compatibility and cut-out dimensions, fit the hob securely, and confirm the electrical or gas supply suits the model. Gas work is done only by qualified professionals.
Dryer installation
Positioning, levelling and power connection, plus ventilation or drainage setup depending on whether it is a vented, condenser or heat-pump model.
Built-in appliance installation
Cabinet dimensions, fitting clearances, alignment and ventilation are checked and coordinated with your existing kitchen units, so the appliance sits flush and works as intended.
Appliance Installation for Apartments, Villas and Businesses
The site affects the job as much as the appliance does.
Apartments
Compact kitchens and shared building rules mean access, lift use and timing often need planning. Rented homes may need landlord or building approval first.
Villas
Larger kitchens, laundry rooms and utility areas, sometimes with several appliances installed in one visit.
Offices and commercial properties
Pantry and kitchen appliances installed with minimal disruption to staff and customers. Scope for commercial equipment is confirmed in your quote.
Built-in or Freestanding: What Changes?
The two types need different preparation.
Freestanding appliances
These stand on their own, so installation centres on positioning, levelling, ventilation space and connections. Most can be installed quickly once the supply is ready.
Built-in appliances
These must fit the cabinet opening exactly. Dimensions, clearances, alignment and ventilation all matter, and cabinet adjustments may be needed.
What’s Included, and What May Need Extra Work
No surprises: we confirm scope before work starts.
Usually part of the installation
- Positioning and levelling
- Connecting to existing, suitable supply points
- Testing and a basic operational check
- A walkthrough at handover
May need additional work
- New water, drainage or power points
- Cabinet or worktop modification
- Gas connections and specialist electrical work
- Wall repairs or reinforcement for mounting
Gas and specialist electrical work: gas connections must be carried out by appropriately qualified professionals, and some electrical work needs a specialist. If you smell gas, leave the area, avoid switches and flames, and contact the emergency services or a qualified gas professional right away.
How Our Appliance Installation Works
Six steps from first message to handover.
Tell us what you need
Share the appliance, its model and where it’s going. Photos of the space help.
Receive your quote
We confirm the scope and price for the agreed work. Complex jobs may need a visit first.
Pre-installation check
We check the space, dimensions, supply points and any fittings before starting.
Install and connect
The appliance is positioned, levelled and connected following the manufacturer’s instructions.
Test
We run the appliance and check for leaks, noise and correct operation.
Handover
We walk you through the basics and tidy the area before we leave.
How to Prepare for Your Installation
A little preparation keeps the visit short.
- Clear the installation area and access route.
- Keep the manufacturer’s manual and all accessories to hand.
- Measure the space, especially for built-in models.
- Check that water, drainage and power points are within reach.
- Confirm building access and any approval needed from management or your landlord.
- Let us know about any cabinet, worktop or wall concerns up front.
What Affects the Cost of Appliance Installation in Dubai?
Installation prices vary with the job, so we quote for your specific scope.
- Appliance type and number of appliances
- Freestanding or built-in
- Whether suitable supply points already exist
- Cabinet, worktop or wall modifications
- Access, floor level and parking or lift arrangements
- Any gas or specialist electrical work required
Send us the appliance details and a photo of the space and we’ll confirm the scope and price for the agreed work before it begins.
What to Expect from Extreme Cool
A straightforward, tidy installation.
Checked before we start
Space, dimensions and supply points are reviewed first, so problems surface before the appliance is moved.
Installed to the manual
We follow each manufacturer’s instructions for positioning, ventilation and connections.
Tested and explained
You see the appliance working before we finish, and we walk you through the basics.
Frequently Asked Questions
We install washing machines, dishwashers, refrigerators and freezers, ovens, cookers, hobs, dryers and built-in kitchen appliances. Ask us if you need something not listed
Availability depends on our schedule and the job. Tell us when you need it when you request a quote and we'll confirm what is possible.
It depends on the appliance, whether it's built-in, the existing connections and any extra work needed. We confirm the price for the agreed scope before work begins.
A freestanding appliance with ready connections is usually quicker than a built-in unit or one needing new supply points. We'll give you a realistic estimate with your quote.
Gas connections must be done by appropriately qualified professionals. Tell us if your appliance runs on gas so we can confirm how it will be handled.
Far far away, behind the word mountains, far from the countries Vokalia and Consonantia, there live the blind texts. Separated they live in Bookmarksgrove right at the coast
Freestanding appliances mainly need positioning, levelling and connections. Built-in models must also fit the cabinet opening exactly, with the right clearances and ventilation.
If new water, drainage or power points, or cabinet changes, are needed, we'll explain this and quote for it before starting.
Clear the area, keep the manual and accessories ready, and check access and any building approval. Our preparation checklist above covers the rest.
